SQUAD CASE of 12 WC BERETTA 92G (CONTRACT UPGRADES)

$18,222.00

Description

THESE ARE THE ORIGINAL LAW ENFORCEMENT CONTRACT UNITS IN CASES OF 12 (TWELVE) INCLUDING THE SWAT CASE SHOWN (AS ISSUED). WE WILL NOT SPLIT CASES SOLD IN SQUAD PACKS ONLY! CONTRACT SPECS AS FOLLOWS: Highly modified units with M9A1 frames and 92A1 round trigger guard profiles, improved checkering, dehorned 92G Brigadier slide H model (heavy), enhanced slide to frame fit, Trijicon tritium dovetail front sights which are removable and can be replaced with the HD system, barrels are cut down for flush fit with slide stainless steel match barrels with recessed crown sub 2.5 inch guarantee 50 meters match ammo/ransom rest, 4.7” Elite II length w/ black matte high heat finish, tactical oversize steel magazine release, steel de-cocking levers- NOTE: these contract units have NO external safeties; they are double action first round single action subsequent. The lever on the slide is not a safety it is a decocker only.. safely lowers the hammer after your last shot with a round in the chamber. Skeletonized Elite II hammer, D hammer spring, steel WC trigger, Wilson Combat rear u-notch with Trijicon night site (front), Wilson Combat fluted steel guide rod, G10 Dirty Olive grips with Wilson Combat logo medallion, Wilson Combat logo on slide, checkered frontstrap and backstrap, beveled magazine well, picatinny compatible rail for mounting light or laser, special serial number range with WC prefix. These units as described above are currently available from Wilson Combat on a custom order basis WITHOUT INTERIOR BLUEPRINT AND WITH FACTORY TRIGGER ASSEMBLY WITH 9-10LB PULL. Our LE contract units were further upgraded to include full interior blueprint, full action job, full complete new trigger work hand honed installed certified and range tested, beveled magazine wells with LANYARD LOOP RINGS AND LANYARDS, 15 round SandRes magazines with PVD coating (reduces friction while the magazine tube design reduces the possibility of crap accumulation within the round column greatly increasing reliability and functioning), Hardigg GSA issue fitted case for these specific squad packs. Price comparison? You cannot buy squad packs as described anywhere in the world except from Rockegroup LLC but you can order a WC Brigadier from Wilson Combat for $1250 shipped on their website (stated three month delivery or until a complement of 1000 units sold at which point sales cessation); then spend another $340 gutting it, blueprinting the interior, action tune trigger work WITH LANYARD LOOPS AND GEMTECH LANYARDS and you are at 1600 plus with no mags and no case. Twelve units kicks you to $19200 add $615 for SWAT case $19815. Ships with 42 (forty two) sand resistant sandres 15 round magazines.

Description

THESE ARE THE ORIGINAL LAW ENFORCEMENT CONTRACT UNITS IN CASES OF 12 (TWELVE) INCLUDING THE SWAT CASE SHOWN (AS ISSUED). WE WILL NOT SPLIT CASES SOLD IN SQUAD PACKS ONLY! CONTRACT SPECS AS FOLLOWS: Highly modified units with M9A1 frames and 92A1 round trigger guard profiles, improved checkering, dehorned 92G Brigadier slide H model (heavy), enhanced slide to frame fit, Trijicon tritium dovetail front sights which are removable and can be replaced with the HD system, barrels are cut down for flush fit with slide stainless steel match barrels with recessed crown sub 2.5 inch guarantee 50 meters match ammo/ransom rest, 4.7” Elite II length w/ black matte high heat finish, tactical oversize steel magazine release, steel de-cocking levers- NOTE: these contract units have NO external safeties; they are double action first round single action subsequent. The lever on the slide is not a safety it is a decocker only.. safely lowers the hammer after your last shot with a round in the chamber. Skeletonized Elite II hammer, D hammer spring, steel WC trigger, Wilson Combat rear u-notch with Trijicon night site (front), Wilson Combat fluted steel guide rod, G10 Dirty Olive grips with Wilson Combat logo medallion, Wilson Combat logo on slide, checkered frontstrap and backstrap, beveled magazine well, picatinny compatible rail for mounting light or laser, special serial number range with WC prefix. These units as described above are currently available from Wilson Combat on a custom order basis WITHOUT INTERIOR BLUEPRINT AND WITH FACTORY TRIGGER ASSEMBLY WITH 9-10LB PULL. Our LE contract units were further upgraded to include full interior blueprint, full action job, full complete new trigger work hand honed installed certified and range tested, beveled magazine wells with LANYARD LOOP RINGS AND LANYARDS, 15 round SandRes magazines with PVD coating (reduces friction while the magazine tube design reduces the possibility of crap accumulation within the round column greatly increasing reliability and functioning), Hardigg GSA issue fitted case for these specific squad packs. Price comparison? You cannot buy squad packs as described anywhere in the world except from Rockegroup LLC but you can order a WC Brigadier from Wilson Combat for $1250 shipped on their website (stated three month delivery or until a complement of 1000 units sold at which point sales cessation); then spend another $340 gutting it, blueprinting the interior, action tune trigger work WITH LANYARD LOOPS AND GEMTECH LANYARDS and you are at 1600 plus with no mags and no case. Twelve units kicks you to $19200 add $615 for SWAT case $19815. Ships with 42 (forty two) sand resistant sandres 15 round magazines.